WETTING AGENTS

COAG Plus Hydro products are based on ethoxylated alcohols, glycols, and proprietary surfactant blends. They are non ionic, stearate free, clean, clear, easy to use without pre-dilution and can be added directly to your coagulant. They contain no thickeners that may react adversely to water and form a gel. All components have been formulated under CFR 21 and are widely used in the cosmetic industry. 

Advantages

 

-Silicone free and stearate free

-Washes easily from formers

-Powderless

-Clean and clear

-Stays suspended

-Miscible in water

-Neutral pH range

-Economical

-Coats multiple substrate materials

-Does not require dilution

 

Festured Products

COAG PLUS HYDRO 320 B:

In Hydro 320B, a nano particle is present at less than 1%. This particle carries a charge that has been reported to increase latex pick up on a former. This is especially useful in multi dip coatings and in situations where a sharp coagulant line is needed.

COAG PLUS HYDRO 320 A:

In Hydro 320 and Hydro A there are no residual solids. All Hydro products provide good wetting for glazed, bisque, plastic and metal formers. The Hydro products release ability may vary with the type of latex used, degree of compounding, strength of the coagulant and thickness of the dipped item. Coag Plus Hydro formulas have been successful with thin films as well as heavier walled products.

© 2020 Crusader Chemical Co., Inc. 

Crusader believes all information to be given as accurate and true.  Crusader specifically disclaims any expressed or implied warranties, including warranties of merchantability and fitness for a particular purpose.  Crusader expressly disclaims any liability for incidental or consequential damages.

2330 Severn Street 

Baltimore, MD 21230

USA

crusadercc@crusaderchemical.com

  • LinkedIn Black Round